{"id":8496,"date":"2018-01-09T06:35:16","date_gmt":"2018-01-09T14:35:16","guid":{"rendered":"http:\/\/www.heuermontage.com\/?p=8496"},"modified":"2018-01-09T06:35:16","modified_gmt":"2018-01-09T14:35:16","slug":"metal-work","status":"publish","type":"post","link":"https:\/\/www.heuermontage.com\/?p=8496","title":{"rendered":"Metal Work"},"content":{"rendered":"

\"\"<\/p>\n

I don’t even know what some of the words mean: “The early metalworker was familiar, for example, with hammering, embossing, chasing, inlaying, gilding, wiredrawing, and the application of chemicals.” But I do know that I like the finished products of all this activity, particularly when it is made out of wrought iron.<\/p>\n

\"\"<\/p>\n

In fact I find myself chasing it with the camera wherever I can – although that is different from the one cited above…: “Chasing is accomplished with hammer and punches on the face of the metal. These punches are so shaped that they are capable of producing any effect\u2014either in intaglio (incising beneath the surface of the metal) or in relief\u2014that the metalworker may require. The design is traced on the surface, and the relief may be obtained by beating down the adjacent areas to form the background.”<\/em><\/p>\n

\"\"<\/p>\n

I learned this and more from an overview in the Encyclopedia Brittanica:<\/p>\n

Ironwork is fashioned either by <\/span>forging or casting. <\/span>Wrought iron is the type of ironwork that is forged on an anvil. There are no fabrication similarities to <\/span>cast iron, which is poured in a molten state into prepared sand molds.<\/em><\/p>\n

Wrought iron is fibrous in structure and light gray in colour. It can be hammered, twisted, or stretched when hot or cold. The more it is hammered, the more brittle and hard it becomes; but it can be brought back to its original state by <\/span>annealing (heating and then cooling slowly). It will not shatter when dropped.<\/em><\/p>\n

The individual components of a wrought-iron design are often plain or twisted rods, with or without chisel-mark incisions. They are frequently composed as a series of straight, parallel members or in combination with scrolls, or as a repeat design of some geometric shape such as the quatrefoil. Where two curved members are tangent, they are characteristically secured together by bands or collars, rather than by welding. Where two straight bars intersect, it is accredited craftsmanship to make the vertical bar pierce or thread the horizontal member. Grilles consisting of two series of parallel small-diameter rods, one series at right angles to the other, were sometimes interlaced or woven.<\/em><\/p>\n

For details and history you can read this:https:\/\/www.britannica.com\/topic\/metalwork#ref600786 <\/a><\/p>\n

or a short version, if you don’t want to have your nose in the book until 2019)<\/p>\n

The evolution of decorative ironwork<\/a><\/p><\/blockquote>\n